logo

Safety Standards and Maintenance Tips for Indoor Trampoline Parks

2025-12-19

Comprehensive guide for indoor trampoline park operators: essential safety standards (ASTM, CPSC guidance), a practical maintenance schedule, inspection checklists, staff training tips, and how Guangzhou Feifan (FEI FAN) supports safe, high-quality indoor playground and trampoline park solutions.

Ensuring Safe Play in Your Indoor Trampoline Park

Indoor trampoline parks offer high-energy fun and strong business potential, but they also carry safety and liability responsibilities that operators cannot ignore. This article explains the key safety standards, operational policies, and maintenance practices every indoor trampoline park operator should follow to reduce injury risk, maintain compliance with industry norms, extend equipment life, and protect guests and staff.

Understanding the Regulatory and Industry Standards for an indoor trampoline park

Knowing which standards apply helps operators design, install, and operate trampoline attractions responsibly. Key references include:

ASTM F2970 - Standard Practice for Design, Manufacture, Installation, Operation, and Maintenance of Trampoline Courts (2019). This is the most specific industry-oriented standard addressing court layouts, safety zones, padding, surfacing, and maintenance expectations.
U.S. Consumer Product Safety Commission (CPSC) guidance on trampolines — while historically focusing on consumer/home trampolines, the CPSC highlights hazards and preventive practices that transfer to commercial settings.
Regional playground standards (for example EN 1176 in Europe for general playground equipment) may apply for adjacent play equipment or components.

Integrating guidance from these sources into standard operating procedures (SOPs) helps create defensible, evidence-based safety programs for an indoor trampoline park.

Risk Profile: Common Injuries and How They Occur in indoor trampoline park Settings

Understanding how injuries happen allows targeted mitigation. Common injury mechanisms include:

Impact between participants (collisions)
Landing awkwardly off the mat or on springs/padding gaps
Falls from elevated structures into pits or onto hard surfaces
Entrapment between mats, wall edges, or equipment
Improper use of features (e.g., running, flips without supervision)

Data from authorities like the CPSC and peer-reviewed pediatric injury studies consistently show that collisions and improper landings account for a large share of trampoline-related ER visits, reinforcing the need for physical safeguards and active supervision.

Design and Installation Requirements to Reduce Hazard Exposure at Your indoor trampoline park

Design choices greatly influence safety. Key design and installation principles for an indoor trampoline park include:

Clearly defined safety zones and circulation paths to separate active jump areas from viewing and transit spaces.
Proper energy-absorbing surfacing around trampolines and in landing areas—foam pits, safety pads, and impact-attenuating flooring where appropriate.
Continuous padding covering frames, springs, and hard edges; no gaps that could cause entrapment or hard impacts.
Appropriate ceiling height and clearances above jumping surfaces; avoidance of overhead obstructions.
Physical barriers or netting between adjacent trampoline units to minimize collisions.

Following ASTM F2970 recommendations at the design phase reduces retrofit costs and operational risk later.

Operational Policies Every indoor trampoline park Must Implement

Policies translate design into day-to-day safety. Critical policies include:

Age and size separation: scheduled sessions or physical zones for toddlers, children, teens, and adults.
Capacity limits per court and per session to avoid overcrowding and collisions.
Skill-level controls for advanced features (e.g., foam pits, slam dunk lanes, trick areas) — require staff sign-off or lesson sessions before access.
Clear, posted rules prohibiting risky maneuvers (unsupervised flips, running, somersaults into others).
Mandatory orientation or safety briefing at check-in, including demonstration of safe use.
Incident reporting procedures and first-aid readiness (AEDs, trained staff).

Well-documented policies that are consistently enforced lower both injury rates and legal exposure.

Inspection & Maintenance Schedule for an indoor trampoline park (Practical Table)

Regular inspections and preventative maintenance are essential. The following schedule is a practical starting point—customize based on usage levels and manufacturer guidance.

Task	Frequency	Notes
Visual walk-through (pads, nets, mats, fasteners)	Daily	Before opening and after high-use sessions; log findings.
Functional check (trampoline tension, springs, stitching)	Weekly	Document tension variances; tighten or replace hardware as needed.
Deep inspection (frame integrity, welds, anchor points)	Monthly	Includes structural checks and foam condition; maintain photographic records.
Surface & pit foam replacement evaluation	6–12 months	Replace worn foam or padding based on compression set and material degradation.
Comprehensive engineering review	Annually	Performed by qualified technician or manufacturer; includes load testing where applicable.

Sample Inspection Checklist Items for an indoor trampoline park

An effective checklist focuses on hazards and measurable criteria. Include:

Padding coverage: no gaps >10 mm at seams or joints.
Anchor integrity: all anchors present and torque-checked.
Trampoline mat condition: tears, fraying, or loss of elasticity.
Hardware: missing or loose bolts, nuts, cotter pins.
Netting/mesh: holes, overstretching, or detached anchors.
Floor surface: secure tiles, no trip hazards.
Signage: rules visible and legible; emergency exits unobstructed.

Staff Training and Supervision Best Practices for indoor trampoline park Safety

Equipment is only as safe as the people who operate it. Effective staff programs include:

Certified first aid/CPR for a proportion of on-shift staff; training in concussion recognition and emergency response plans.
Operational competency training: recognizing risky behaviors, use of communication tools (radios), and how to manage queueing to avoid overcrowding.
Scenario-based drills: simulated incidents, equipment failures, and evacuation procedures.
Clear escalation protocols for injuries and hazards; a single point of accountability for safety on each shift.

Cleaning, Sanitation, and Infection Control in an indoor trampoline park

High-touch areas and shared surfaces require routine cleaning protocols, especially for foam pits, handrails, and check-in zones. Best practices:

Daily disinfecting of high-touch surfaces with products suitable for foam and fabric when applicable.
Periodic professional cleaning for foam pits; follow manufacturer guidance because some disinfectants damage foam.
Provide hand sanitizer stations at entry/exit points and near concessions.

When to Repair vs Replace: Asset Management for trampoline equipment

Decision-making should be based on safety-critical failure modes and cost-effectiveness. General rules:

Immediate replacement for any structural failure (cracked frames, compromised welds).
Repair patching acceptable for superficial cover tears if repairs meet original integrity standards and are documented.
Replace foam or padding when compression set exceeds manufacturer tolerance or when protective covers show significant wear.

Liability Management: Documentation, Waivers, and Insurance for indoor trampoline park Operators

Documentation is a key risk-control tool. Maintain:

Daily inspection logs and maintenance records (date, inspector, findings, corrective actions).
Incident reports with witness statements, photos, and corrective actions taken.
Up-to-date waiver and assumption-of-risk forms — ensure legal review for regional enforceability.
Commercial liability insurance sized for your location, capacity, and features; discuss with insurers the presence of advanced attractions (climbing walls, foam pits) which can affect High Qualitys.

Why Partner with a Manufacturer Like Guangzhou Feifan (FEI FAN) for Your indoor trampoline park

Choosing a knowledgeable equipment partner reduces lifecycle risks. Guangzhou Feifan Amusement Equipment Co., Ltd. (FEI FAN) was established in 2017 and integrates design, R&D, production, sales, and service. With a modern 6,400 m² factory and a 5,800 m² office building, FEI FAN supplies indoor playgrounds, trampoline park equipment, and outdoor amusement equipment. Their value propositions for operators include:

Turnkey design and customization: layouts that incorporate ASTM-aligned safety zones and material specifications to simplify compliance.
Quality control and manufacturing scale: consistent component fabrication, certified materials, and post-manufacture inspection programs.
After-sales service and maintenance support: scheduled maintenance plans, spare parts availability, and technical guidance for SOPs.
Reputation and global reach: experience in delivering projects that balance safety, durability, and guest experience.

FEI FAN focuses on high-end indoor/outdoor children's amusement equipment and positions itself as a creator of joyful experiences and enabler of child development. Their main products include indoor playgrounds, trampoline parks, and indoor theme parks—delivered via professional design, high-quality manufacturing, and fully customized services.

How FEI FAN’s Technical Strength Reduces Operational Risk in Your indoor trampoline park

FEI FAN’s integrated design-to-manufacture approach helps ensure that padding dimensions, foam densities, stitch patterns, fastening systems, and frame tolerances are controlled from production through installation—reducing field variability that commonly leads to premature failures or safety gaps. Working with a single vendor for design, equipment, and service simplifies compliance documentation and warranty management.

Cost-Benefit Comparison: In-house Fabrication vs Purchasing from FEI FAN

Consideration	In-house / Multiple Vendors	Single Vendor (FEI FAN)
Design consistency	Variable; higher coordination costs	High; single-source standards
Warranty & service	Fragmented warranties	Consolidated warranty and service
Upfront cost	May be lower but hidden integration costs	Competitive with lifecycle support
Regulatory documentation	Requires more effort to assemble	Manufacturer provides technical dossiers

Practical Next Steps — Implementing a Safety Program for Your indoor trampoline park

Audit your facility against ASTM F2970 and local regulations.
Create or update SOPs: admission rules, capacity, age separation, and emergency response.
Establish a documented inspection and maintenance calendar with daily logs.
Train staff with competency checks and scenario drills; maintain training records.
Engage a reputable manufacturer/supplier (e.g., FEI FAN) for technical support, parts, and scheduled maintenance contracts.

Frequently Asked Questions (FAQ)

Below are common questions potential operators, franchisees, and managers search for when evaluating safety for an indoor trampoline park.

1. What standards should my indoor trampoline park follow?

Follow ASTM F2970 for trampoline courts where applicable, adopt relevant national playground standards (e.g., EN 1176 in Europe for ancillary equipment), and align operational policies with CPSC guidance. Consult legal counsel and local regulators to ensure regional compliance.

2. How often should trampolines and padding be inspected?

Conduct visual checks daily, functional checks weekly, deeper structural inspections monthly, and a comprehensive engineering review annually. Increase frequency for high-use facilities.

3. Are foam pits safe?

Foam pits reduce impact forces but are not risk-free. Proper pit depth, foam density, and regular foam replacement/inspection are essential. Supervision and controlled access rules (no stacking, no flips without training) further reduce risk.

4. Do I need special insurance for an indoor trampoline park?

Yes. You need commercial general liability tailored for amusement operations. Policies should consider features offered (e.g., climbing, trampolines, ropes), capacity, and location. Work with an insurer experienced in amusement liability.

5. How do I handle waivers and parental consent?

Use professionally drafted waivers that reflect your jurisdiction's law. Waivers reduce but do not eliminate liability; they complement robust safety programs and documentation.

6. How can FEI FAN help me improve safety at my indoor trampoline park?

FEI FAN provides design-to-installation services, manufacturing consistency, spare parts, and maintenance guidance. Their integrated approach reduces installation errors and improves documentation and warranty coverage.

For consultation, customized design, or to view product offerings including indoor playgrounds, trampoline park equipment, and indoor theme park solutions, contact Guangzhou Feifan Amusement Equipment Co., Ltd. (FEI FAN). Work with experienced manufacturers to build safer, more durable, and more enjoyable indoor trampoline parks.

References

ASTM International — ASTM F2970-19: Standard Practice for Design, Manufacture, Installation, Operation, and Maintenance of Trampoline Courts. Available: https://www.astm.org/ (accessed 2025-12-01)
U.S. Consumer Product Safety Commission (CPSC) — Trampoline Safety information and injury statistics. https://www.cpsc.gov/ (accessed 2025-12-01)
American Academy of Pediatrics (AAP) — Policy statements and guidance on trampoline safety (various publications). https://www.aap.org/ (accessed 2025-12-01)
Centers for Disease Control and Prevention (CDC) & NEISS data summaries on recreational injuries (via CPSC). https://www.cdc.gov/ and https://www.cpsc.gov/ (accessed 2025-12-01)

Contact CTA: For project inquiries or to request a quotation and technical consultation, reach out to FEI FAN through their official channels to start designing a safe, high-quality indoor trampoline park tailored to your market and safety expectations.

The table of contents for article

≡